|   | Twitter Icon |   |  

  Request a Quote     1800-2745-661     Click For Service Call Registration

Shock Testing Machine

Home /Shock Testing Machine

Environmental Simulation

<< Go Back to Environmental Simulation

Overview Shock Testing Machine

Shock Testing Machines of various capacities to be used in the design and destructive testing of components, hybrids, circuits, and complete assemblies. These machines are used testing a variety of products from Aerospace, Millitary, Industrial and consumer

The leader in the industry for 30 years - Shock Machine Specification Overview

  • Keypad Entry of Test Parameters (With 12 character alphanumeric display)
  • Shock testing from 3g’s to 30,000g’s
  • Test Specimen weights up to 1,000 pounds (453.59 kg)
  • Shock duration from 0.012ms to 100ms
  • Single or multiple drop cycle at a rate of up to 8 cycles per minute
  • Compliance with MIL- STD-202, MIL-STD-750, MIL-STD-810 and MIL-STD-883
  • 3 Shock Pulse Generator: Half Sine, Sawtooth, and Square Wave
Shocktesting-200x153

SM-105 Smallest model for testing specimens up to 25 Kg.
Carriage Surface: 9.25” x 9.25”

Dimensions

  • Floor area required: 24 in. x 24 in.
  • Carriage Surface: 9.25 in. x 9.25 in.
Height
  • (Air Mounts Inflated) Floor to top of control panel: 43 in.
  • Floor to carriage down position: 49 in.
  • Floor to top of safety shield: 62 in.
Weight
  • Installed Weight: (632 kg.) 1395 lb.
  • Shipping Weight: (751 kg.) 1655 lb.
  • Specimen Weight: 50 lb.
  • maximum Height: Not limited by machine Size: Not limited by machine Center of gravity of specimen must be within 1 inch of center of carriage.
SM-105

SM-110 Mid-range model tests specimens up to 100Kg.
Carriage Surface: 16″ x 16″

Height
  • (Air Mounts Inflated) Floor to top of control panel: 43 in.
  • Floor to carriage down position: 50 in.
  • Floor to top of safety shield: 63 in.
Weight
  • Installed Weight: (1406 kg.) 3100 lb.
  • Shipping Weight: (1547 kg.) 3410 lb.
  • Specimen Weight: 200 lb.
  • maximum Height: Not limited by machine
  • Size: Not limited by machine
  • Center of gravity of specimen must be within 1.5 inches of center of carriage.
AVEX-SM-110

SM-220 Largest model capable of testing up to 500Kg.
Carriage Surface: 24” x 24”

Height
  • (Air Mounts Inflated) Floor to top of the control panel: 54 in.
  • Floor to carriage down position: 67 in.
  • Floor to top of safety shield: 80 in.
Weight
  • Installed Weight: (3402 kg.) 7500 lb.
  • Shipping Weight: (3810 kg.) 8400 lb.
  • Specimen Weight: 1000 lb.
  • maximum Height: Not limited by machine
  • Size: Not limited by machine
  • Center of gravity of specimen must be within 2 inches of the center of carriage.
Avex1